Name: EPROM Programmer SuperPro-610P Flash Memory Programmer (Programs EPROM, EEPROM, Flash Memory and other IC Chips)
SKU: 23380
Availability: InStock

Description

EPROM Programmer SuperPro-610P Flash Memory Programmer (Programs EPROM, EEPROM, Flash Memory and other IC Chips)

EPROM, EEPROM, Flash Programmer Description

PROGRAMMER HIGHLIGHTS

Supports 34,000+ flash memories, EPROMs, EEPROMs and other IC devices from 240+ IC manufacturers.
Supports low voltage devices with Vcc as low as 1.2v.
High programming throughput
USB 2.0 high-speed PC interface
Programmer-control S/W supports XP / Vista / Windows 7, 8 and 10
CE and RoHS compliant

PROGRAMMER FEATURES

DEVICE SUPPORT
IC Device types supported include:
EEPROM, EPROM, Serial EEPROM, FLASH memory, Configuration Serial PROM, GAL, EPLD, Firmware HUB, Microcontroller, PIC, Standard Logic Device, etc.
Supports standard DIP and skinny DIP packages from 8 to 48-pins on standard equipment
Supports a wide variety of surface-mount devices (SMDs) and other IC packages with reliable factory-made adapters. Packages supported include: PLCC, CLCC, SOIC, LAP, QFP, TQFP, VQFP, TSOP, TSOPII, SOP, PSOP, TSSOP, SON, etc.
Free software updates can be downloaded via Internet at any time.

Advanced circuitry inside:

PROGRAMMER HARDWARE
The programming unit has 48 universal pin-drivers built-in. There is no need to add additional or optional pin-drivers for programming devices of up to 48-pins.
Since each pin-driver is software programmable, proper voltage levels will be applied to each and every pin, not just the Vcc pins, allowing true low-voltage programming for low-voltage devices.
Reverse insertion check and pin continuity check help to prevent devices from accidental damage.
Light-weight and portable, good for field applications and international travel (takes 110V to 240V AC).
EASY-TO-USE PROGRAMMER SOFTWARE
Supports XP / Vista / Windows 7, 8 and 10
User-friendly software allows you to do these and more, easily:
- Read data from a master chip, put it in the data buffer
- Save the data info t file
- Program a new chip with this data
- Erase a used EEPROM chip before program it
- Secure the chip so that others cannot copy it
- Load data from a file instead of from a master chip
- Display the data buffer on the screen and allow you to edit it
- Plus a whole lot more
See how easy it is
to use the software

The Auto-program command allows you to erase a chip, blank-check the chip, program it, and verify it, all automatically with just one click.
The Project function simplifies operations for your production people or yourself. Settings such as device selection, file name selection, device configuration, program options, etc., can be saved into project files.
Advanced functions allow you to do things that would be impossible to do with other chip programmers. These include:
- Data splits: 1-to-2, or 1-to-4, for both byte-wide and word-wide devices.
- Byte swap: for Intel or Motorola byte arrangements
- Optionally do write-protection on selected sectors
- Optionally do read-protection on selected blocks
- Do specific device configurations for Microchip PIC micros
- Setup counters so that your operator can easily keep track of how many chips have been programmed.
- Plus a whole lot more
PROGRAMMER SPECIFICATIONS

IC CHIP DEVICE SUPPORT
IC Chip Device Types Supported:
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory (NOR), Firmware HUB, EPLD, Microcontroller, Microchip PIC, etc.
Device Packages Supported on Standard Equipment:
DIP, SDIP.
Device Packages Supported with Optional Adapters:
PLCC, JLCC, SOIC, QFP, TQFP, VQFP, PQFP, TSOP, TSOPII, SOP, SSOP, PSOP, TSSOP, SON, QFN, etc.

IC CHIP DEVICE UPDATES
Software and device algorithms are updated regularly.
Current software can be downloaded free of charge
Updates are available by mail at a nominal charge.
HARDWARE & ELECTRICAL
PC interface: High speed USB 2.0
AC power supply: Input 100V-240V AC, 50/60 HZ. Output 12VDC, 2 Amp.
Programmer physical size: 7″ x 5″ x 1 3/8″ high (178 mm x 127 mm x 35mm)
Net weight (programming unit, AC power supply, USB cable): 2 Lbs.
Gross shipping weight: 4 Lbs.
WARRANTY
2-years. Programmer is warranted to be free of manufacturing or workmanship defects for two (2) years from the date of purchase. Warranty covers parts, labor, and free UPS ground shipping from Advin back to customer. (Free ground shipping applies to 48-states and Canada only).
INCLUDED ITEMS
Programmer unit with 48-pin DIP ZIF socket adapter.
USB Cable.
AC power supply.
Free S/W downloads and updates form the web.
Registration and user-feedback form.

<align=left>

Programmer
Back View
USB Cable

AC Power Supply
Optional Carry Case Inside View

OPTIONAL ITEMS </align=left>
Programmer socket adapters for different SMD device packages.
Please see SMD to Programmer Adapters
Programmer carry case