Description

AGCO EDT DIAGNOSTIC TOOL

AGCO EDT 05.2025 Diagnostic Tool with CFD1

Panasonic CFd1 MK3 512 ssd

Languages: English, Dutch, French, Finnish, German, Spanish, Portuguese, Danish, Russian, Polish, Italian, Turkish, Swedish Sweden, ETC.

Database Languages: Only English

Massey Ferguson EU 2021 : Square Balers: 2224, 2233, 2234, 2234XD, 2244

Fendt  EU 2021 : Square Balers: 990, 1270, 1290, 1290XD, 12130

Valtra EU 2021

Vehicle Version:

SCR Process (real-time operation data in a process view)

Injector Calibration (code calibration to ECU)

Airsystem process details

Package contains:

1 x AGCO CAN USB Interface
2 x 9-pin Deutsch cables
2 x 4-pin cables for Fendt
1 x 12-pin cable for Fendt (Deutz engines)
1 x 16-pin cable for Massey Ferguson and Valtra
1 x Panasonic Touch-D1 Tablet

Diagnostic:

Active Errors, Error log, Shutdown log, Injector Calibration log, Software log, Software Fingerprint log, Emission Fault log

Profiles:

Engine Load, Engine Speed, ECU Temperature, DEF

Available tests:

Actuators, Airsystem, Engine Rail High-Pressure, Engine Run-Up, Engine Compression, Cylinder Cut-Out, PCV Hysteresis, Pressure Delivery Rate, SCR Emptying, SCR Pressure Build-up, SCR Dosing Rate, Catalyst Cleanup, Visco Fan Speed

Service Information

*functions may differ, depending on a vehicle model

Coverage:

• AGCO;
• RoGator;
• Challenger;
• ISEKI;
• FENDT;
• SISU;
• FELLA;
• SpraCoupe;
• GLEANER;
• Sunflower;
• Laverda;
• TerraGator;
• Massey Ferguson;
• Valtra;
• WHITE Planters.

Fault handling – Invalid fault codes occurring when an output is activated after being
faulted has been fixed. Startup check of most outputs have been fixed and will now
show a fault code if outputs are not consuming any power at startup have been fixed.
Task controller translation – Error in task controller translation has been identified and
should now be displayed correctly. Old version used Current Flake Count as a unit
which is now changed into Flakes.
Accumulator support – Phiber accumulator support has been added, the user interface
will now show the status of the accumulator and when the accumulator ejects, all
bales will be ejected at the same time on BaleLink. Because of ACM limitations there
will still be a short time delay between drops, this requires a change in BaleLink which
will be made later.
NT03 v2.10.19 – NT03 standalone software to support new sound files to address PPR Item
P21696 – Operators cannot hear near full and full bale alarms.
Digistar Scale Module – Flash package detects bootloader version and will provide appropriate
steps to update if hardware requires.